Appendix C, Section 14

WRDT 560: Monroe / Oak Park, MI: Flea Power on the Tallest AM Tower in America

Part of AM Radio Facts and Trivia: The AM Broadcast Band in the USA. Updated November 16, 2026.

WRDT on 560 kHz is a Class D station licensed to Monroe, Michigan, running 500 watts daytime from a four-tower directional array with 11 augmentations, one of the most complex low-power antenna systems in the country. But at sunset, WRDT abandons that array entirely and switches to a completely different transmitter site 40 miles to the north, where 13 watts (roughly the output of a decent light bulb) feed into the tallest tower radiating an AM signal in the United States.

The Night Site. WRDT’s nighttime transmitter sits at the base of the Detroit Metro Media Center tower in Oak Park, Michigan, at 42-27-13.1 N, 83-09-49.7 W. The tower stands 992 feet tall: a massive broadcast structure carrying FM stations, TV translators, and microwave links. At 560 kHz, 992 feet works out to 203.4 electrical degrees, over a half wavelength, well past the optimal quarter-wave point, and deep into the territory where antenna gain starts doing remarkable things. The FCC records tell the story: RMS Theoretical: 394.75 mV/meter (per kW) or 45.01 mV/meter at 0.013 kW. That’s nearly double the 199.56 mV/m per kilowatt that WRDT’s four-tower daytime array in Monroe produces. Watt for watt, the nighttime antenna is 76 times more efficient than the daytime array. Even at just 13 watts, the Oak Park tower produces 45.01 mV/m non-directionally across the Detroit metro. The 500-watt daytime array, with 38 times more power flowing through four towers and 11 augmentations, produces only 199.56 mV/m. The giant tower does more with a light bulb’s worth of power than most stations do with hundreds of watts and multiple towers.

The Skirted Antenna. The tower doesn’t belong to WRDT: it’s a shared commercial broadcast tower loaded with FM and TV antennas. WRDT’s AM signal rides on it through a wire skirt antenna, one of the most unusual AM antenna designs in use. A skirted antenna works by hanging a set of wires (the “skirt”) from a point partway up the tower, running them down and outward to a feed point below. At the top, the skirt wires are shorted to the tower structure at a calculated point: around 203 electrical degrees for 560 kHz. At the bottom, they connect to an antenna tuning unit through coaxial cable. The skirt and the portion of the tower above the short point together form the radiating element, effectively creating an AM antenna on a tower that was never designed for AM. The FM and TV antennas at the top of the tower are completely unaffected. The guy wires have insulators spliced in to prevent them from coupling with the 560 kHz signal and distorting the radiation pattern. The ground system is minimal: reportedly only three radials, because the tower base is surrounded by parking lots and commercial buildings that make a conventional 120-radial ground system impossible.

How a skirted antenna works. This drawing also appears in Feeding an AM Tower: Series, Shunt, Skirt and Top-Loaded.

THE SKIRTED ANTENNA (FOLDED UNIPOLE): FEEDING A GROUNDED TOWER FM / tenant antennas can ride a grounded tower with no isocouplers ATU (tuning house) bonded at the TOP skirt wires connect to the tower steel up here insulated standoffs hold the wires a few feet off the steel all the way down fed at the BOTTOM ring RF drives the skirt; the skirt drives the grounded tower base bolted straight to ground, lightning's favorite AM antenna COMPARE: SERIES-FED whole tower hot, fed at the . tower IS the radiator

Feeding the tower without touching it. A conventional AM tower is series-fed: the whole structure sits on a base insulator, electrically hot from bottom to top. The skirted antenna, the folded unipole, turns that inside out. The tower is bolted straight to ground; the radiator is a cage of skirt wires hung around it on insulated standoffs, bonded to the steel near the top and fed at a ring near the bottom. RF driven into the skirt induces current in the grounded tower, and skirt and tower radiate together as one fat folded element. What stations buy with it: a grounded tower (lightning runs harmlessly to earth, and FM, STL, or cellular tenants can mount without isocouplers); a feed impedance stepped up to a friendlier value than a short series-fed tower offers; and skirt-length trimming as a tuning handle. The trade-offs are narrower bandwidth and a system that's fussier to adjust, which is why the skirt is the specialist's choice: rescue jobs, shared towers, and short sticks, while the classic insulated series feed still rules the band.

Drawing C.14-1

Two Sites, Two Worlds. The contrast between WRDT’s two sites could not be more extreme. By day, 500 watts feeds a four-tower directional array with 11 augmentations in Monroe, a complex, precisely engineered system 40 miles south of Detroit, protecting other stations on 560 kHz with surgical pattern shaping. At night, the Monroe array goes dark and a wire skirt on a shared tower in the suburbs carries the signal at 1/38th the power, and does it with an antenna so efficient that those 13 watts produce a quarter of the field strength that 500 watts achieves through four towers. The station is owned by Crawford Broadcasting, which also operates WMUZ 1200 in nearby Taylor, Michigan, a 50 KW station with 10 nighttime towers. Crawford runs both one of the most powerful and one of the least powerful AM signals in the Detroit market, and the least powerful one has the better antenna.

© 2026 Chris, N6JET. Free to read and share for non-commercial use with credit (Creative Commons BY-NC 4.0). Not for sale.

More in Station Stories

All AM radio stories by subject · AM radio interactive tools and simulators · AM Trivia Challenge quiz