Chapter 2, Section 5

Feeding the Tower: Series, Shunt, Skirt, Top-Loaded & Sectionalized

Part of AM Radio Facts and Trivia: The AM Broadcast Band in the USA. Updated November 15, 2026.

Earlier stories made the case that the tower IS the antenna. That leaves an intensely practical question: you have several hundred feet of steel and a transmitter in a building beside it: how, exactly, do you get the power onto the stick? Broadcasting has settled on five classic answers, and the FCC's own bookkeeping encodes three of them: every AM tower in the database carries a type code: Type 0 (a plain radiator), Type 1 (top-loaded), or Type 2 (sectionalized), while the choice of series, shunt, or skirt feed determines whether the steel itself is electrically hot or safely grounded. Each answer is a different bargain among cost, lightning, tenants, and physics.

FIVE WAYS ONTO THE STEEL: THE LINEUP SERIES the default · Type 0 hot tower, fed at the base, on porcelain SHUNT the slant wire · Type 0 slant wire to a tap grounded tower, fed partway up the steel SKIRT folded unipole · Type 0 grounded tower; skirt cage bonded top, fed bottom TOP-LOADED the capacitance hat · Type 1 the steel the hat replaces short tower made electrically taller by the hat SECTIONALIZED insulated sections · Type 2 insulated break; fed at the section (WHO-style) hot / radiating grounded steel insulator feed

Same color language as every tower figure on this site: red steel is hot and radiating, gray steel is grounded, gold is porcelain, blue is where the transmitter's power arrives. Read the lineup left to right and the logic unfolds: series puts the whole tower on porcelain and feeds the bottom; shunt and skirt keep the steel grounded and sneak the power on with a slant wire or a wire cage; top loading fakes the height a short tower lacks (the dashed ghost is the steel the hat replaces); and sectionalizing breaks the tower into insulated pieces and feeds it in the middle, WHO-style, to shape where the power goes. Details, trade-offs, and famous examples for each are in the paragraphs and table below.

Drawing 2.5-1

Series feed: the default. Stand the tower on a base insulator, keep it hot from bottom to top, and drive the base directly from the ATU: this is the textbook arrangement (see Inside the Tuning House) and it accounts for the overwhelming majority of American AM towers: Type 0, plain steel, fed at the bottom. Its virtues are simplicity and predictability; its costs are everything these AM pages spend whole stories describing: the porcelain the whole structure balances on, the Austin transformer needed just to light it, the ball gap needed to survive lightning, and the isocouplers needed before anyone else's antenna can share the steel.

Shunt feed: the slant wire. The oldest trick for the opposite case: a tower that is, or must be, bolted straight to ground. Run a wire from the ATU up at a slant to a tap point partway up the grounded tower, typically attaching where the tower presents a usable impedance, and drive that. The grounded base and the slant wire form a loop that couples power into the steel, and the whole tower radiates even though you could lean a bare hand on its base. Shunt feeding flourished mid-century precisely because it rescued towers that couldn't be insulated: self-supporting giants, towers carrying grounded equipment, or stations that simply couldn't afford to jack up hundreds of tons of steel and slip porcelain underneath.

Skirt feed: the folded unipole. The modern refinement of the same grounded-tower idea replaces the single slant wire with a cage of skirt wires hung around the tower on standoffs, bonded to the steel near the top, fed at a ring near the bottom. (The full anatomy is in the figure below.) Beyond the grounded base, the fold buys a step-up in feed impedance that makes short towers far easier to match, and the skirt length gives the engineer a tuning handle a plain tower never offers. Its trade is bandwidth and fussiness, which is why the skirt is the specialist's tool (rescue jobs, shared sticks, and short towers) rather than the default.

THE SKIRTED ANTENNA (FOLDED UNIPOLE): FEEDING A GROUNDED TOWER FM / tenant antennas can ride a grounded tower with no isocouplers ATU (tuning house) bonded at the TOP skirt wires connect to the tower steel up here insulated standoffs hold the wires a few feet off the steel all the way down fed at the BOTTOM ring RF drives the skirt; the skirt drives the grounded tower base bolted straight to ground, lightning's favorite AM antenna COMPARE: SERIES-FED whole tower hot, fed at the . tower IS the radiator

Feeding the tower without touching it. A conventional AM tower is series-fed: the whole structure sits on a base insulator, electrically hot from bottom to top. The skirted antenna, the folded unipole, turns that inside out. The tower is bolted straight to ground; the radiator is a cage of skirt wires hung around it on insulated standoffs, bonded to the steel near the top and fed at a ring near the bottom. RF driven into the skirt induces current in the grounded tower, and skirt and tower radiate together as one fat folded element. What stations buy with it: a grounded tower (lightning runs harmlessly to earth, and FM, STL, or cellular tenants can mount without isocouplers); a feed impedance stepped up to a friendlier value than a short series-fed tower offers; and skirt-length trimming as a tuning handle. The trade-offs are narrower bandwidth and a system that's fussier to adjust, which is why the skirt is the specialist's choice: rescue jobs, shared towers, and short sticks, while the classic insulated series feed still rules the band.

Drawing 2.5-2

Top loading: Type 1. Sometimes the problem isn't how to feed the tower but that there isn't enough tower. A capacitance hat (outrigger spokes, a flat-top span, or umbrella wires sloping toward the guys) makes a short stick electrically taller, raising its radiation resistance so ground losses eat less of the power. It's the antique flat-top antenna's key insight (play with the trade-off yourself in the Flat-Top Antenna Length Explorer) wearing modern clothes; about one tower in fourteen uses it, including the all-top-loaded daytime arrays of WDRU and WYMM in the 50 KW tables.

Sectionalized: Type 2. The rarest and most exotic: break the tower itself into insulated sections and feed it somewhere other than the bottom. A scant handful of US towers do it, and they're the aristocracy of the band: the anti-fade designs that squeeze maximum groundwave from tall steel, the center-fed "shortened Franklin" of WHO 1040 (diagrammed in Antenna Oddities), and the true full-wavelength Franklin of KFBK that holds the field-strength record. Sectionalizing exists to shape the vertical radiation pattern (pushing power at the horizon instead of the sky) and it costs enough that almost nobody has done it since super-distance coverage stopped paying the bills.

MethodBaseFeed attachesWhy choose itFCC typeFamous example
SeriesInsulated (hot)Tower baseThe simple, proven default0Nearly every AM tower
Shunt (slant wire)GroundedTap partway upFeed a tower you can't insulate0Mid-century self-supporters
Skirt (folded unipole)GroundedBottom of skirt cageGrounded steel + friendlier impedance0Shared / short towers
Top-loadedEitherPer feed methodMake a short tower electrically taller1WDRU, WYMM; historic flat-tops
SectionalizedEither (WHO: grounded)Base or mid-towerShape the vertical pattern2WHO 1040, KFBK Franklin

Table 2.5-3

Sources: FCC AM tower type codes · Radio-TimeTraveller "Tower Talk" (tower-type census) · FCC AM Query (WHO, KFBK).

© 2026 Chris, N6JET. Free to read and share for non-commercial use with credit (Creative Commons BY-NC 4.0). Not for sale.

More in The Tower and Antenna

All AM radio stories by subject · AM radio interactive tools and simulators · AM Trivia Challenge quiz