Appendix B, Section 5

Why Do AM Stations Have FM Translators?

Part of AM Radio Facts and Trivia: The AM Broadcast Band in the USA. Updated November 15, 2026.

About 2,700 AM stations in the United States now rebroadcast their signal on a low-power FM translator. For many of them, the FM translator carries more listeners than the AM signal itself.

What Is an FM Translator? An FM translator is a low-power FM transmitter (typically 10 to 250 watts) that receives a primary station's signal and rebroadcasts it on a different FM frequency. It's not a full radio station; it has no studios, no staff, no programming of its own. It simply repeats whatever the primary station is broadcasting. The translator has its own FCC license, its own call sign (like W288DZ or K228FV), and its own antenna, usually mounted on an existing tower, building, or utility pole.

Studioone programAM transmittere.g. 5,000 W by day,much less at nightFM translator10 to 250 W,same power 24 hoursThe translatorrepeats the AMprogramAM tower arrayTranslator antenna on anexisting tower, building or poleown call sign, e.g. W288DZBy dayAt nightAM covers the wide area; FM fills in townAM shrinks after sunset; FM stays the sameAM coverageFM translator(sizes illustrative,not to scale)

Drawing B.5-1

Why AM Stations Need Them. AM radio has three problems that FM translators solve:

  1. Nighttime coverage loss. Hundreds of AM stations must reduce power or change to directional patterns at sunset to protect other stations. Some drop from 50 kW to a few hundred watts. Former daytime-only stations run as little as 1-28 watts at night. An FM translator runs the same power 24 hours a day: no sunset shutoff, no power reduction, no pattern changes.
  2. Building penetration. AM signals don't penetrate modern steel and concrete buildings well. FM does. In urban areas, an AM station may be inaudible inside an office building while the FM translator comes through clearly.
  3. Car radios. Several automakers (particularly electric vehicle manufacturers) have dropped AM radio from their dashboards, citing electrical interference from drive motors. Ford reversed course after Congressional pressure, but the trend is clear. An FM translator keeps the station available in cars that no longer have AM.

The FCC AM Revitalization Program. In 2009, the FCC began allowing AM stations to acquire FM translators specifically to rebroadcast their AM signal. This was part of the AM Revitalization initiative: the FCC's recognition that AM radio was in trouble and needed help. The practice had actually started a year earlier, under an interim FCC experiment that granted temporary authority case by case; one of the earliest AM stations to take advantage was WZBK 1220 in Keene, New Hampshire, which began rebroadcasting on an FM translator (W276CB, 103.1 FM) on May 16, 2008. The program was enormously popular. By late 2026, about 2,700 AM stations had FM translators, and for many of them the translator had become the primary way listeners heard the station.

The FCC Rule That Kills Translators. Under FCC Section 74.1263(b), an FM translator cannot operate when its primary AM station is off the air. This rule was designed for a world where AM was the primary service and the translator was a supplement. But when WJLX 1240 in Jasper, Alabama, lost its tower to theft in 2024, the FCC denied their request to keep the FM translator running, killing both signals. The station's entire audience was on the translator. Nobody had noticed when the AM signal went silent. The rule hasn't caught up with the reality that for many stations, the FM translator IS the station.

The Daytime-Only Exception. There’s one deliberate carve-out to that rule, aimed at exactly the stations that need it most. A translator rebroadcasting a Class D daytime-only AM (one that signs completely off at sunset) is allowed to stay on the air after dark, and may even originate its own programming during the hours the AM is silent (FCC §74.1231). Without it, a daytimer’s translator would go dark every night at precisely the hours FM coverage matters most. So while the AM transmitter sleeps at sundown, its FM translator plays on through the night, the rare case where a translator legally outlives its parent station each day.

The Irony. AM stations spent decades and millions of dollars building elaborate tower arrays, directional systems, and ground radial networks to squeeze every watt of coverage out of their AM signals. Now many of those same stations are heard primarily through a 250-watt FM translator mounted on someone else's tower. The 50 kW transmitter and the 6-tower array still run, but the listeners are on 106.9 FM.

© 2026 Chris, N6JET. Free to read and share for non-commercial use with credit (Creative Commons BY-NC 4.0). Not for sale.

More in Reference

All AM radio stories by subject · AM radio interactive tools and simulators · AM Trivia Challenge quiz